No Analog Cards in Web Admin Interface

In case of missing analog input cards in Web Admin Interface you should run some commands to check if cards are inserted into the server & if kernel can see the cards.

1. cat /etc/mainboard.xml
snap@sukkerert:~$ cat /etc/mainboard.xml
<?xml version="1.0" encoding="UTF-8"?>
<mainboard>
    <id>SPXE-14S-R10-dev</id>
    <name>PCIe 12+ slots (development) SPXE-14S-R10</name>
    <slot type="pcie">0a:00</slot>
    <slot type="pcie">0b:00</slot>
    <slot type="pcie">0c:00</slot>
    <slot type="pcie">0d:00</slot>
    <slot type="pcie">04:00</slot>
    <slot type="pcie">05:00</slot>
    <slot type="pcie">06:00</slot>
    <slot type="pcie">07:00</slot>
    <slot type="pcie">10:00</slot>
    <slot type="pcie">11:00</slot>
    <slot type="pcie">12:00</slot>
    <slot type="pcie">01:00</slot>
    <slot type="ports">COM2 COM1</slot>
    <slot type="cpu">USB USB ETH0 ETH1 VGA</slot>
    <module>coretemp</module>
    <cpusensors>
        <sensor name="Core0" warning="60" critical="70"/>
        <sensor name="Core1" warning="60" critical="70"/>
        <sensor name="Core2" warning="60" critical="70"/>
        <sensor name="Core3" warning="60" critical="70"/>
    </cpusensors>
</mainboard>


2. dmesg | grep -i hauppauge
snap@sukkerert:~$ dmesg | grep -i hauppauge
[    6.478608] CORE cx23885[0]: subsystem: 0070:8541, board: Hauppauge WinTV-HVR1850 [card=24,autodetected]
[    6.803925] tveeprom 25-0050: Hauppauge model 85021, rev C5F5, serial# 7883541
[    6.803936] cx23885[0]: hauppauge eeprom: model=85021
[   11.677887] Registered IR keymap rc-hauppauge
[   11.678001] input: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:04.0/0000:06:00.0/rc/rc0/input3
[   11.678098] rc0: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:04.0/0000:06:00.0/rc/rc0
[   11.679324] CORE cx23885[1]: subsystem: 0070:8541, board: Hauppauge WinTV-HVR1850 [card=24,autodetected]
[   12.004548] tveeprom 40-0050: Hauppauge model 85021, rev C5F5, serial# 7883612
[   12.004558] cx23885[1]: hauppauge eeprom: model=85021
[   16.853965] Registered IR keymap rc-hauppauge
[   16.854027] input: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:05.0/0000:07:00.0/rc/rc1/input5
[   16.854085] rc1: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:05.0/0000:07:00.0/rc/rc1
[   16.855006] CORE cx23885[2]: subsystem: 0070:8541, board: Hauppauge WinTV-HVR1850 [card=24,autodetected]
[   17.181332] tveeprom 43-0050: Hauppauge model 85021, rev C5F5, serial# 7883494
[   17.181343] cx23885[2]: hauppauge eeprom: model=85021
[   22.088725] Registered IR keymap rc-hauppauge
[   22.088779] input: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:1c.0/0000:0e:00.0/0000:0f:02.0/0000:10:00.0/rc/rc2/input7
[   22.088823] rc2: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:1c.0/0000:0e:00.0/0000:0f:02.0/0000:10:00.0/rc/rc2
[   22.089635] CORE cx23885[3]: subsystem: 0070:8541, board: Hauppauge WinTV-HVR1850 [card=24,autodetected]
[   22.416155] tveeprom 46-0050: Hauppauge model 85021, rev C5F5, serial# 7883627
[   22.416166] cx23885[3]: hauppauge eeprom: model=85021
[   27.339545] Registered IR keymap rc-hauppauge
[   27.339632] input: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:1c.0/0000:0e:00.0/0000:0f:03.0/0000:11:00.0/rc/rc3/input9
[   27.339727] rc3: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:1c.0/0000:0e:00.0/0000:0f:03.0/0000:11:00.0/rc/rc3
[   27.347243] CORE cx23885[4]: subsystem: 0070:8541, board: Hauppauge WinTV-HVR1850 [card=24,autodetected]
[   27.689949] tveeprom 49-0050: Hauppauge model 85021, rev C5F5, serial# 7883470
[   27.689961] cx23885[4]: hauppauge eeprom: model=85021
[   33.615148] Registered IR keymap rc-hauppauge
[   33.615210] input: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:1c.0/0000:0e:00.0/0000:0f:04.0/0000:12:00.0/rc/rc4/input11
[   33.615264] rc4: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:1c.0/0000:0e:00.0/0000:0f:04.0/0000:12:00.0/rc/rc4

3. dmesg | grep -i ddbridge
snap@sukkerert:~$ dmesg | grep -i ddbridge
[    6.447411] DDBridge 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    6.447418] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    6.451434] DVB: registering new adapter (DDBridge)
[    6.451435] DVB: registering new adapter (DDBridge)
[    6.451436] DVB: registering new adapter (DDBridge)
[    6.708546] DDBridge 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.708556] DDBridge driver detected: Digital Devices Octopus CI
[    6.710148] DVB: registering new adapter (DDBridge)
[    6.710149] DVB: registering new adapter (DDBridge)
[    6.710452] DDBridge 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.710466] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    6.713279] DVB: registering new adapter (DDBridge)
[    6.713281] DVB: registering new adapter (DDBridge)
[    6.713282] DVB: registering new adapter (DDBridge)
[    6.912561] DDBridge 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.912578] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    6.915473] DVB: registering new adapter (DDBridge)
[    6.915475] DVB: registering new adapter (DDBridge)
[    6.915476] DVB: registering new adapter (DDBridge)
[    7.120185] DDBridge 0000:0c:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.120202] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    7.123041] DVB: registering new adapter (DDBridge)
[    7.123043] DVB: registering new adapter (DDBridge)
[    7.123044] DVB: registering new adapter (DDBridge)
[    7.320328] DDBridge 0000:0d:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    7.320336] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[    7.323239] DVB: registering new adapter (DDBridge)
[    7.323241] DVB: registering new adapter (DDBridge)
[    7.323242] DVB: registering new adapter (DDBridge)


4. dmesg |grep 07:00 -C10
[   16.340911] cx23885_dvb_register() allocating 1 frontend(s)
[   16.340914] cx23885[1]: cx23885 based dvb card
[   16.390236] tda18271 40-0060: creating new instance
[   16.392272] TDA18271HD/C2 detected @ 40-0060
[   16.468204] postgres (1734): /proc/1734/oom_adj is deprecated, please use /proc/1734/oom_score_adj instead.
[   16.621514] tda18271 41-0060: creating new instance
[   16.623543] TDA18271HD/C2 detected @ 41-0060
[   16.853467] DVB: registering new adapter (cx23885[1])
[   16.853470] DVB: registering adapter 18 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
[   16.853941] cx23885_dev_checkrevision() Hardware revision = 0xd0
[   16.853946] cx23885[1]/0: found at 0000:07:00.0, rev: 4, irq: 18, latency: 0, mmio: 0xf7200000
[   16.853952] cx23885 0000:07:00.0: setting latency timer to 64
[   16.853965] Registered IR keymap rc-hauppauge
[   16.854027] input: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:05.0/0000:07:00.0/rc/rc1/input5
[   16.854085] rc1: cx23885 IR (Hauppauge WinTV-HVR1850) as /devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:05.0/0000:07:00.0/rc/rc1
[   16.854204] input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input6
[   16.854549] rc rc1: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 1
[   16.854575] cx23885 0000:10:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   16.855006] CORE cx23885[2]: subsystem: 0070:8541, board: Hauppauge WinTV-HVR1850 [card=24,autodetected]
[   17.181332] tveeprom 43-0050: Hauppauge model 85021, rev C5F5, serial# 7883494
[   17.181335] tveeprom 43-0050: MAC address is 00:0d:fe:78:4a:e6
[   17.181336] tveeprom 43-0050: tuner model is NXP 18271C2 (idx 155, type 54)
[   17.181338] tveeprom 43-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[   17.181339] tveeprom 43-0050: audio processor is CX23888 (idx 40)
[   17.181340] tveeprom 43-0050: decoder processor is CX23888 (idx 34)

If not helpful then contact SnapTV Support !



 

Did you find this article helpful?